The introduction of Golf bar

A set of golf clubs limit shall not exceed 14. The composition of the package as the personal preferences may be.
　　Usually a set of clubs include the following:
<>

Callaway Legacy Forged Irons

　　Hardcore: 3,4,5,6,7,8,9,PW,SW
　　Wood poles: 1,3,5 and push rod.
　　This does not mean that every time you play must be carrying these clubs. Beginners can carry a serving bar (1th, wooden pole), or 3rd wood poles, 3,5,7, hardcore or s, and 9th, plus a support rod.
　　Type of wood poles
　　Wood poles: wooden pole there are two types, persimmon trees and maple trees. -The hardest Club heads usually with persimmon wood. Thin laminate (three-ply wood) usually use Maple. Woodwork made of thin laminated bar head to complicated. Production process is similar to copying a key. Second, is the most common wood poles are made of maple wood Club heads. In General, one-sixteenth-foot maple wood is similar to ternary plate pressing into. This type of wood heating and compression, finally made similar persimmon wood Club heads. Many golf Member pointed out that the impact force of persimmon wood Club heads feels more stiff, but that there is no factual basis. Some appetite for golf is more laminated Maple bar head on the ground that will be more durable.
　　Metal rods: Bao Zhu metal bar head is quite popular, mainly because the share of perimeter after additional control (this is not the original design intent, but a product of casting process for weight distribution more moderate). Stainless steel bar head cast hollow so as not to overweight, insulating polyurethane noise abatement usually perfusion. Rods of metal for a lot of people noticed the

Callaway X-22 Tour Irons

header when swing with or without hitting can increase the distance of the Centre.
　　Graphite: shaft commonly used materials are often used to make graphite rods. Fabrication of two slightly different. Graphite prepreg mixed ABS plastic, and into the bar head dies. Second version are made in epoxy prepreg and compresses the mixture into mold. Graphite Rod head weight and made of wood and metal bars, but are usually larger than the usual size. So can increase the "sweet spot" of size. However, test results and could not confirm graphite Rod head better than other material bar head swing or more far away.
　　Plus size: GAAP oversize Club heads, usually made of stainless steel or graphite, sweet spot of the area is relatively large. Even when hitting the off center, or you can let fly orbits farther, straighter. If you use a stainless steel rod, Rod surface to be thinner in order to achieve the overall weight to normal (wood poles are 191-205 g, 1th). This could cause some surface rupture of metal rods or sunken. Some manufacturers are launching medium metal rods, sweet spot as big, but bar head thickness remain unchanged so that down.
　　Metal matrix composite surface: in line with the increasing size of Club heads, manufacturers are starting to use Rod inserts (usually plastics, graphite or light metals). This can be of greater size or sunken surface but do not worry about Rod surface rupture. This can also reduce the overall weight.

Titleist AP2 710 Irons

　　In the case of metal rods, Rod insertion is a quite novel design, about the swing movement and ability to tolerate errors are not yet any test results.